Monday, August 16, 2010

Kwatsi Bay

Kwatsi Bay is deserving of the name "Glory Be"
Directions to the marina - it is the only structure in the bay.
The scenery at rustic Kwatsi Bay Marina

We departed Pierre's shortly after 10 AM, bound for Kwatsi Bay. We could see "Sea Jay"( Jim and Cheryl Matheson) on AIS anchored in Laura Bay, just 4 miles away, so we headed that way. By the time we arrived, they were underway so we stopped and chatted in mid-channel for a few minutes. We may see them later in the week.

Heading slowly up Tribune Channel we discovered the macerator pump had failed again. Fortunately we had a spare and were able to replace it underway. The failure was the same as before (failed duckbill valves) probably caused by an incorrect installation of the discharge hose reducer at the factory (it was only 14 inches from the pump, not the 60 inches the manufacturer recommended). We had brought back a longer section of hose in July but had not installed it when we replaced the duckbill valves on the existing pump. This time we installed the longer hose. In the process we also discovered a poorly crimped electrical connection which we also fixed. We are hoping this finally fixes the problem since we have no spare duckbill valves.
With the underway repair complete we finally arrived at Kwatsi Bay Marina at 1315 to a warm greeting by Anca. Kwatsi Bay reminded us of Misty Fiords in Alaska with the cliffs and high hills. We set the prawn pots and cooked up the crab for happy hour on the dock (there were 6 boats present) and also met Max. We converted more of the crab into crab "mac & cheese) with bow tie pasta, 4 kinds of cheese, diced green chilies, green onions and a topping of panko and sliced tomatoes. It was great. After dinner we checked the prawn pots, where we found a couple of dozen spot prawns. We moved the pots to a new location hoping for better luck in the morning.

August 16, 2010


Another sunny morning, but the prawn pots were empty. The new location was not good. We are heading for Laura Bay and will be out of e-mail contact for a few days.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.